• Please handle the product carefully. Jolts, impacts, or a fall, even from a low
height, can cause damage to the product.
• Consult an expert when in doubt about the operation, safety, or connection of the
appliance.
• Maintenance, modifications, and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
c) Mains cable
Do not tamper with power supply components. Risk of death by electric
shock!
- Always ensure proper connection.
- Never use damaged power supply components.
- Do not modify power supply components.
• The mains outlet must be located near to the device and be easily accessible.
• Never plug in or unplug the mains plug when your hands are wet.
• Ensure the power cord does not touch the hot surface of the appliance.
• Never pull the mains plug from the socket by pulling at the cable. Always pull it
from the mains socket using the intended grips.
• Unplug the mains plug from the mains socket if you do not use the device for an
extended period of time.
• Disconnect the mains plug from the mains socket in thunderstorms for reasons
of safety.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges
or put under mechanical stress.
• Avoid excessive thermal stress on the mains cable from extreme heat or cold.
• Do not modify the mains cable. Otherwise the mains cable may be damaged. A
damaged mains cable can cause a deadly electric shock.
• Do not touch the mains cable if it is damaged.
- First, power down the respective mains socket (e.g. via the respective circuit
breaker) and then carefully pull the mains plug from the mains socket.
- Never use the product if the mains cable is damaged.
• A damaged mains cable may only be replaced by the manufacturer, a workshop
commissioned by the manufacturer or a similarly qualified person, so as to prevent
any danger.
• Ensure that cables are not pinched, kinked or damaged by sharp edges.
• Always lay cables so that nobody can trip over or become entangled in them. This
poses a risk of injury.
d) Placement
• Do not place on or near a hot gas or electric burner or in a heated oven.
• Do not place the device on water-sensitive surfaces. They could be damaged by
splashing water.
• Do not place the device on sensitive furniture, as it can be damaged by hot steam
escaping the spout.
e) Operation
• Before use, check that the voltage of the wall outlet corresponds to the rated
voltage marked on the rating information.
• Do not operate the appliance without water.
• Never fill the device above the MAX mark. Otherwise boiling water could splash
out and cause injuries to you and people in the vicinity of the device.
• The water level in the kettle must lie between the MIN and MAX marks.
• The lid must always remain closed during use.
• When closing the lid, check that it is securely held.
• Only fill the kettle up with cold, fresh drinking water.
• Never open the lid while water is boiling.
• Do not use the device without water.
• The device must be used on a level work surface.
• Do not move the device during use.
• Do not touch it during use.
• Caution, the device gets hot. Risk of scalding from hot steam escaping from the
spout.
• Only use the device with the base that it comes complete with.
o
Operating instructions
1.7 litre kettle, black
Item no. 2368868
Intended use
The product is used to heat drinking water and intended for household use. It is not intended for
commercial use and thus does not offer commercial-grade operation reliability.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in ba-
throoms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described, the product may be damaged. In addition,
improper use can result in short circuits, fires, electric shocks or other hazards. Read the ins-
tructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Kettle
• Base with power cord and plug
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Description of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
Safety information
Read the operating instructions carefully and observe in particular the safety
instructions. If you do not follow the safety information and information on
proper handling in these operating instructions, we will assume no liability for
any resulting personal injury or damage to property. Such cases will invalidate
the warranty/guarantee.
a) Read first!
• This appliance is not intended for use by persons (in-
cluding children) with reduced physical, sensory or men-
tal capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsib-
le for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
b) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave the packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam, and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions, or
- has been subjected to any serious transport-related stress.
