Attach a new soldering tip and tighten the shaft carefully again.
If you have selected a different type of soldering tip, you
have to correct the temperature of the soldering tip.
Replacing the Fuse
If the mains switch is not lit when the station is turned on although
the outlet is live, separate the soldering station from the mains by
pulling the power plug.
The fuse holder for the circuit breaker is located in the bottom of the
station.
You can remove the fuse insert by turning counter-clockwise with a
matching screwdriver.
A defect fuse may only be replaced with a fuse of the same type and
with equal electric parameters. Never repair the fuse!
Ensure a tight fit when screwing in the fuse insert.
If the defect persists after changing the fuse, put the soldering sta-
tion out of operation.
Cleaning
The appliance should be cleaned with a clean dry cloth or brush
only.
Do not use cleaning agents which contain abrasives,
petrol, alcohol or similar substances for cleaning purpo-
ses. Otherwise the appliance covering could corrode.
Moreover the vapours are detrimental to health and
explosive. Nor should sharp-edged tools, screwdrivers,
metal brushes etc. be used for cleaning purposes.
29
