These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
V1_0513_02-ETS_JL
To install the plug-in card in a flat computer case, a low-profile slot cover is enclosed. Remove
the long slot bracket from the plug-in card and then install the short, low-profile, slot bracket.
• Connect an appropriate power connection on your PC power adapter to the SATA power connection on the
plug-in card. Pay attention to the connector’s correct orientation and do not use any force.
If the power connection on the plug-in card is not connected to the PC power adapter, any
connected USB devices will not function!
• Connect the internal multi-pin connector (see illustration above, position 1) to the USB 3.0 ports on your
PC case (e.g. USB 3.0 front connections). Pay attention to the plug’s correct orientation.
• If necessary, secure all the cables with cable ties, so they cannot obstruct your computer’s fan.
• Close the computer housing.
• Connect your computer and monitor to the mains voltage and switch on all devices.
• If your computer does not start correctly, switch it off immediately and check all the settings and cable
connections.
Before opening the computer again, it must be disconnected from the mains voltage
again, see above!
Driver installation
• After Windows has started, it automatically recognises the plug-in card as new hardware.
• Cancel the automatic hardware recognition.
• Place the enclosed CD into an appropriate drive on your computer.
• Start the CD’s installation software (“setup.exe”), in the folder “USB3.0 Host \ NEC”, and follow all of the
software’s instructions.
It might be necessary to restart Windows, before the USB 3.0 ports on the plug-in card function
properly.
Connecting USB devices
Important:
The SATA power supply on the plug-in card must be connected to an appropriate connector
on your PC’s mains supply. Otherwise, the USB devices connected to the plug-in card will not
be recognised correctly!
a) USB 2.0/1.1 devices
• It is possible, of course, to operate all “old” USB 2.0/1.1 devices with a USB 3.0 port. Simply connect the
USB device to one of the four USB ports on the plug-in card.
• Use conventional USB 2.0/1.1 connection cables to connect the devices.
• Normally, USB 2.0/1.1 devices are not, or only slightly, faster when operated on a USB 3.0 port.
• However, if the USB 2.0 controller on the motherboard works relatively slowly it is possible, for example,
that USB 2.0 hard disks could transfer data faster via a USB 3.0 port on the plug-in card.
b) USB 3.0 devices
• In order to connect a USB 3.0 device, a USB 3.0 cable is necessary. At first glance, the USB-A plug looks
similar to a USB2.0/1.1 plug, however, it has additional internal connector pins.
• The USB-B plug on a USB 3.0 cable, however, has a different shape.
• A USB 3.0 hard disk enclosure can also be operated on a USB 3.0/2.0/1.1 port via a conventional
USB 2.0/1.1 cable. However, a faster data transfer is not possible.
• In order to use the fast data transfer of USB 3.0, not only a USB3.0 controller is necessary but also a
USB 3.0 device and an appropriate USB 3.0 cable.
• USB 3.0 provides a theoretical data transfer of 5 GBit (approx. 600 MByte/s). The transfer speed in
practice depends, however, on the devices involved in the data transfer (internal and external hard disk),
the type of data (many small files or few large files) and many other factors.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Chipset .......................................................Renesas (NEC uPD720201)
System requirements ..................................Windows® XP (Home, Pro, with SP1, SP2, SP3, only 32 bit),
....................................................................
Vista™ (32 bit and 64 bit), 7 (32 bit and 64 bit), 8, 8 Pro,
....................................................................
Linux kernel 2.6.31 and higher
Slot type ......................................................PCI express
Numbers of USB ports ................................2 (external), 2 (internal)
Compatibility ...............................................USB 3.0 / 2.0 / 1.1
Data transmission rate ................................max. 5 Gbps
Operating conditions ...................................+5 to +50 °C, 20 – 80 % RH (non-condensing)
Storage conditions ......................................-25 to +70 °C, 15 – 90 % RH (non-condensing)
Dimensions (W x H x D) .............................92 x 69 x 15 mm
Weight ........................................................37 g (Plug-in card)
USB 3.0 2+2 Port PCI Express Card
Version 05/13
Item no. 43 01 79
Intended use
This product is designed for installation in a PCI Express slot of a computer, to provide two external USB 3.0
ports and one internal 19-pin USB 3.0 connection (corresponds to 2 USB 3.0 A ports).
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Plug-in card
• Short slot cover for flat computer cases
• CD with driver
• Operating instructions
Features
• Intended for installation in a PCI Express slot
• Two internal USB 3.0 ports (1), backwards compatible with
USB 2.0/1.1 (Port suitable for connection cable, e. g. for USB 3.0 front
connection on a PC case)
• SATA power connection (2)
• Slot cover (3), replaceable by short slot cover for installing the plug-in
card in a flat computer case
3
1
2
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Installation
If you do not have the expertise to perform the installation, please arrange for the
installation to be carried out by suitably qualified personnel or a suitable specialist shop.
Incorrect installation can cause damage to the plug-in card and also to your computer and
all connected devices.
Caution, lethal hazard!
Switch off the computer in which the plug-in card is to be installed and disconnect all
devices from the mains voltage by removing the plugs from the mains socket! Just turning
off at the on/off switch is not enough!
• Open your computer’s case and carefully remove the cover.
• Locate a free PCI Express slot, remove the corresponding slot cover and insert the card into the slot.
Screw in the plug-in card firmly, check that it is positioned correctly in the PCI Express slot!
