CQL1524-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Getting Started
z
Please charge your Bluetooth speaker fully before its first use.
z
To charge the battery:
Using a Micro USB Charging Cable (included), insert the USB power cable into
the micro USB port located on the left of the speaker. Connect the other end of
the USB cord into a powered USB source such as a computer, laptop or USB AC
adapter.
The LED indicator will turn RED while charging and turn off when fully charged.
On low power, a tone will be periodically heard, indicating that the speaker should
be charged.
The speaker will power off automatically when there is no any device connected
over 5 mins.
Powering ON/OFF
z
Press and hold the
button,
a voice will be heard indicating power on and the
Bluetooth LED indicator will quickly flash .
z
The speaker will enter Bluetooth pairing mode. The speaker will automatically
re-pair to any nearby previously paired devices.
z
Press and hold the
button again, a voice will be heard indicating power off.
Playing Music via Bluetooth
z
Press and hold the
button, the speaker will enter Bluetooth pairing mode
and
the Bluetooth LED indicator quickly flashing.
z
Make sure the Bluetooth function on your device is turned on.
z
Search the speaker named “ XXX ”.
z
Once you have selected the speaker, your device will pair without a password. (If
your device prompts for a password, enter the password
ā
0000
ā
.)
z
After a successful pairing, a voice will be heard and the Bluetooth LED indicator
will be solid blue.
z
Start playing music on your device. Make sure that you keep your device within a
33 feet range of your Bluetooth speaker.
z
Adjust the volume of your device to a comfortable level.
z
Turn off the unit when not in use.
Adjusting Volume and Playback
z
Press and hold the
and
buttons on speaker to adjust volume, or use the
controls on a connected device.
A voice will be heard when the volume reach
maximum.
