CONNECT USING OPTICAL
3. Power ON the unit.
1. Connect one end of optical connection cable ( not supplied ) to the optical jack on the rear
of the unit as pictured above.
2. Connect the other end to the DVD or TV back panel.
4. Press the SOURCE button repeatedly until the "OPT" appears on display.
10A
FUSE
NOTE: Before connecting, disconnect power.
DVD or TV
Optical Cable(Not Supplied)
5. Play the music as usual and set the desired volume.
12
Or press OPTICAL on Remote Control.
NOTE:
If there is no audio output (only picture) when your TV or DVD player is connected
to the soundbar, please check DVD audio setting, and set the digital output to PCM format.
