1. Use function button to cycle to either FM or AM which will be shown with indicator light on LED diaplay.
5. Press CH + and CH- buttons on the remote control to select and play the stored stations..
PLAY RADIO
2. Press and hold ( or ) button to seach stations automatically. To store a searched station,
4.. Press MEMO button on the remote control to display on the LED the preset for selected station.
-A total of 30 AM stations and 30 FM stations can be stored into the unit's memory.
Note
- Fully extend and relocate the antenna to improve the reception.
DISC PLAYBACK
1.One disc is inserted, unit will automactically shift to DVD mode and begin playback.
2.Press button to eject the disc.
3.Press buttons to go through the menu and press ENTER button to confirm the selections.
4.Press PREV and NEXT button to skip to the previous or next chapter / track..
5.Press REV and FWD buttons to search through the chapter/track backward and forward at different speed.
6. Press ANGLE button to select different camera angles that available in the disc.
7. Press SUBTITLE button to select a different subtitle language if available on the disc.
8. Press TITLE button to enter title menu.
-Function mentioned above may not be available on all the discs.
Note
9. Press MENU button to enter disc root menu.
USB/SD CARD PLAYBACK
1. Insert USB drive or USB card into appropriate slot.
2. Press FUNC button until indicator light shows USB or SD.
3. Press buttons to go through the menu and press ENTER button to confirm the selection.
-The USB player supports MP3/ AVI /WMA/JPEG formats.
Note
TV/AUX PLAYBACK
1. Connect your external audio device (MP3 player/cell phones, etc.) to the AUX IN 2 jack in the front
of the unit with an 3.5mm audio cable (not supplied). Or connect DVD player, VCR, DVR, etc to the
AUX 1 jack in the rear of the unit with the RCA audio cable.
2. Press FUNC button on the remote control until desired indicator light, either TV or AUX is highlighted.
3. Activate your external device.
-The TV can also connected to the VIDEO OUT in the rear of the unit with an AV cable to watch video files.
Note
10. Press OSD button to display the disc inforamtion.
6
press MEMO button, the screen will diaplay the order, eg: P01, then press MEMO again to confirm.
Press CH- and CH+ button to play the stored station.
3. when a station searched, press MEMO to display the storage, press CH+ or CH- to select a order,
eg:select P20 as the storage position, press MEMO to confirm the position. next time, press CH+
or CH- to find P20 to play the station stored.
