2
Connects2
Vision
www.c2vision-eu.com
INSTALLATION
Subscribe to our YouTube Channel for installation
guides and tips...
www.youtube.com/connects2
Cut loop to disable parking
guidelines
CAM-JP1
ACC 12V
Ground
Extension Cable
Power Adapter
Cable
Video RCA
Make Connections to Vehicle/Unit
1. Attach the 6-pin connector from the camera to the coloured connector
from the ‘power adapter cable’.
Note: to remove the parking line feature, cut the small looped wire which is
located on the camera connection cable.
2. Attach the black connector from the ‘power adapter cable’ to either side of
the ‘6m extension cable’.
3. Route the extension cable through the vehicle and attach both green flying
wires to sources of a 12V reverse signal/trigger (e.g. brake light).
4. With the extension routed, connect the remaining 4-pin connector to the
‘video output cable’.
5. Connect the black wire to a suitable source of ground and the red wire to a
switched 12V supply. Lastly plug the yellow RCA into the back of the stereo.
CONTENTS
• Camera with cable to mini Male 6-pin connector
• Power adapter with colour coded Female 6-pin to Female 4-pin connectors
• 6m Male to Male 4-pin extension cable with green flying wires
• Video output cable with red & black wires and yellow RCA connector
• Installation accessories including washers and wire tubing
