2
Connects2
Vision
www.c2vision-eu.com
CONTENTS
• Camera with 1m cable to Female DC connector and RCA Female
connector
• 1m DC power cable with Male DC connector
• 6m Male to Male RCA extension cable
• Instructions
INSTALLATION
1. Connect the Black wire to a suitable ground and the Red wire to a switched
+12V supply.
2. If the camera is to be used in the rear of the vehicle, the Red wire should
be connected to the reversing light circuit or an interface which provides a
reverse signal.
3. Select a suitable location for the camera and ensure that the area is free
from all cables, fuel & oil. Whenever possible, avoid locations that are subject
to road dirt & water spray.
4. Using the supplied mounting bracket, mount the camera in the required
position and connect the 1m camera connection cable to the to the
camera’s 1m cable.
NB: Adjustment of the camera may be required to ensure that the correct
angle/orientation of the image is achieved.
5. Using the supplied video cable, connect the camera to the display screen
and ensure that the image is displayed correctly.
6. To swap the image signal from AHD to CVBS, cut the small Blue looped wire
which is located on the camera connection cable.
7. To remove the parking line feature, cut the small White looped wire which is
located on the camera connection cable.
Subscribe to our YouTube Channel for installation
guides and tips...
www.youtube.com/connects2
