3
Need help? Visit support.connects2.com/tickets/technical
CTUST02_IG_v2
INSTALLATION GUIDE
See Wiring Diagram on Pg.4 for more information
Before installing the interface, the factory stereo must be removed and disconnected. To do this, please con-
sult the vehicle owner’s manual/handbook or contact a fitting professional.
A stereo connection (patch) lead is also required for the installation of this interface (supplied seperately).
Please ensure that you have the correct lead before proceeding. For universal patch leads, prepare the wiring
loops in accordance with the instruction manual supplied with the product before installation.
1. Connect the 12 Pin connector from the stereo connection (patch) lead to the interface box
2. Connect the opposite end of the stereo connection (patch) lead to the steering wheel control input on the
back of the aftermarket stereo
NOTE: This may be a 3.5mm jack connector or a wired input depending on the brand of aftermarket stereo
being fitted. Please consult the aftermarket stereo installation manual for further information on where to
make the connection
IMPORTANT: THIS STEP MUST BE COMPLETED BEFORE CONNECTING POWER TO THE INTERFACE.
FAILURE TO DO SO MAY RESULT IN A LACK OF FUNCTIONALITY AND THE NEED TO REINSTALL THE PRODUCT
!
3. Connect the 14 Pin connector from the supplied wiring loom to the interface box
4. Connect 4 Pin camera extension harness to the interface box
5. Connect the power/speaker ISO connector to the power/speaker ISO connector at the rear of the after-
market stereo.
6. Connect any additional outputs from the main wiring harness to the head unit. See ‘Additional Connec-
tions’ on Page 2 for more information.
7. Connect the male yellow RCA to the reverse camera input of the aftermarket head unit
8. To connect a reversing camera, connect the female yellow RCA from the camera extension harness to the
male yellow RCA of the camera.
Note: Ensure that the ‘Camera Connected’ option in the Preferences menu is set to ‘Yes’ for the camera to
function correctly
9. Connect the quadlock connector on the supplied harness to the quadlock connector from the vehicle
10. Test stereo and steering wheel control functionality for correct operation before reassembling the vehicle
dashboard. If Infodapter functions are unresponsive, please uninstall the interface and wiring and reinstall
carefully in accordance with the above steps.
