Connects2 CAM-KIT8, Руководство пользователя

Страница: 3 / 4

www.connects2.com
3
Connects2 Vision
INSTALLATION:
8. Connect the other end of the 2.0m RCA Male to Male extension cable to either
of the RCA Female video connectors on the monitor, connect the 1.0m DC power
cable to the monitor, connect the Black wire on the DC power cable to a suitable
ground, connect the Red wire to a sw12V supply and connect the power
cable to the monitor.
9. Engage reverse gear and check that the camera and sensors are being dis-
played correctly on the monitor.
10. If adjustment of the camera is required, loosen the 2x grub screws using the sup-
plied Allen key and set the camera in the required position.
11. The angle of the sensors may also require adjustment so that the distance of
the object detected corresponds with the distance displayed on the monitor (see
stage/distance/awareness/alarm/display information) the sensors are adjusted in
the same manner as the camera
STAGE/DISTANCE/AWARENESS/ALARM/DISPLAY INFO
Stage: 1
Distance: 2.0-1.6m
Awareness: Safe mode
Alarm: No
Display Info: 2.0-1.6
Stage: 2
Distance: 1.5-1.0m
Awareness: Safe mode
Alarm: BI….BI….BI
Display Info: 1.5-1.0
Stage: 3
Distance: 0.9-0.5m
Awareness: Alarm mode
Alarm: BI..BI..BI
Display info: 0.9-0.5
Stage: 4
Distance: 0.4-0.3m
Awareness: Alarm mode
Alarm: BI.BI.BI
Display info: 0.4-0.3
Stage: 5
Distance: 0.3-0m
Awareness: Danger mode
Alarm: BI……….
Display: 0.0