www.connects2.com
3
FITTING GUIDE
1. Remove the Concert/Symphony head unit.
2. On the rear of the upper dash display, disconnect the LVDS
connector (circled). Connect this into the female connector of the supplied
LVDS harnesss (Fig 1, 4). Connect the male end back into the connector on
the rear of the upper dash display.
3. Locate the fuse box on the side of the dashboard. Take off the cover and
locate the 46 way beige connector with the pink latch. Disconnect this and
replace with the supplied vehicle power/CAN-Bus harness (Fig 1, 2). Connect
the flying red wire to an ACC fuse and the black wire to Ground.
