4
Connects2
Vision
www.c2vision-eu.com
Adjusting Settings
To adjust settings for all viewing modes, press
A
from the HUD menu to enter the settings
menu.
Once in the settings menu, short press
A
to cycle through the various settings screens
available. Screens include camera angle and position for each mode, and guideline
width for parking lines.
Once in a settings screen, the selected setting is indicated by the icon in the centre of
the display. The parameters can be adjusted with
B
and
C
.
To return to the previous screen, Press and hold
A
.
Activating/Deactivating Blind Spot View (BSV) Mode
When in any of the settings screens, a long press of
B
will activate or deactivate BSV
(Blind Spot View).
When active, this will trigger the blind spot camera image when an indicator is activated
and the vehicle is moving at a speed of over 40km/h.
When inactive, using the indicators will not trigger the blind spot view and the camera
will remain in Driving/Rear-View mode.
Note: this function will only work if the CAN-Bus wiring is connected.
Move to next setting
(Short Press)
Return to previous
(Long Press)
Adjust parameter
Adjust paramater
(Short Press)
Activate/Deactivate BSV
(Long Press)
Currently selected setting
Birds-Eye
(Select from HUD Menu)
Left Blind Spot
(Triggered by Indicator - See Below)
Right Blind Spot
(Triggered by Indicator - See Below)
Wide Angle
(Select from HUD Menu)
USING THE WIRELESS CONTROLLER
A
B
C
