Connects2 Aerpro APVPO11 Скачать руководство пользователя страница 2

Страница: 2 / 12

www.connects2.com

www.

aerpro

.com

ABOUT THIS PRODUCT...

APVPO

Rear-View Camera Input and Video-In-Motion for Porsche Vehicles with PCM 3

and PCM 3.1 Navigation Systems. Add On Reverse Camera Interface for OEM

Systems allows the addition of an aftermarket reverse camera to the OEM screen.

Only for vehicles without factory rear-view camera.

Internal DVD video cannot be watched whilst in motion.

Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installa-

tion. The place of installation must be free of moisture and away from heat sources.

Please ensure you use the correct tools to avoid damage to the vehicle or product.

Aerpro can not be held responsible for the installation of this product.

Technical Support

Aerpro want to provide a fast and suitable resolution should you encounter any

technical issues. With this in mind, when contacting Aerpro, try to provide as much

Information as possible. This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: intranet.tdj.com.au/

support

Содержание Aerpro APVPO11












