Assembling tools example
Assembling tools example
For your safety operation
This product has been designed and manufactured to
assure personal safety. Improper use can result in bodily
injury and serious damage to the product. Please read
and observe all warnings and instructions given in this
operation manual.
Improper assembly will result in a loss of performance.
Please read instructions
given in this operation manual.
The product is sensitive to dirt and dust.
The performance will be influenced by the fiber cutting
surface condition. Use a cutter with a sharp blade for the
best results.
Please
insert the fiber into the connector slowly
. If the
fiber is roughly inserted, it might be damaged or broken,
leading to failure of connector installation. Broken fiber
could scatter in all directions.
Do not remove the dust cap
until the connector has
been completely assembled
in order not to cause a high
insertion loss.
A proper amount of index matching gel is applied in the
connector. Do not
insert fiber more than once
into
connector.
1.
2.
3.
4.
5.
6.
XP Fit Plus SC 900 μm
Field Installable Connector
Instruction Manual
Wear safety glasses
before handling optical fiber to
protect the eyes. Small pieces of glass fibers are sharp
and can cause damage if they get in the eyes or
puncture skin if handled wrong.
Never look into
the end of a connector or an optical fiber
which may have a laser coupled to it. Laser light might
damage your eyes. Please note that laser light is not
visible.
When working off of the ground, please be careful not to
drop an assembling tool.
Connector (with wedge): 10pcs
Boot: 10pcs
Fiber holder for 0.9 wire: 1pc
Assembling Jig:1pc
Following tools shall be required adding above parts,
1. Fiber Cleaver
2. Jacket Remover
For your safety operation
Precautions
Precautions
Composition
Composition
(Please use a wrist strap etc.)
Fiber cleaver
Jacket remover
Boot
XP Fit plus SC 900μm
Assembling Jig
Fiber Holder for
0.9 wire
