DS1M12 - Quick Start Guide
© Connective Peripherals Pte Ltd
Clearance Number : CP#032
Document Reference Number: CP_000042
DS1M12_Quick_Start_Guide 1.1
Update service. Windows 7 defaults to automatically
download the device drivers without prompts.
2.
Download the latest device drivers available (at the time
of writing the latest version was 2.08.14):
https://www.connectiveperipherals.com/products/usb-
instruments/usb-oscilloscope/ds1m12.html
Extract the files to a convenient location on your local
drive.
Connect the supplied USB cable to the DS1M12 and the
other end of the cable to a spare USB port on the PC.
Power is supplied by the USB port, so no external power
is required.
The Windows “Found New Hardware Wizard” will appear.
Select the choice to install the drivers from a specific
location and then browse to the folder created in the
previous step where you unzipped the files.
The DS1M12 utilizes a 2-channel FTDI chip, so the
wizard will re-appear a second time to install the drivers
for both device channels. On completion of installation
the device is ready for use.
Application Installation (Oscilloscope)
The scope application file can be downloaded from:
https://www.connectiveperipherals.com/uploader/D
S1M12_Setup.zip
Extract the files to a convenient location on your
local drive.
