2
Your new EmerGen Switch will provide you with a way to safely utilize your
generator power through your existing electrical wiring during a power outage.
You’ll install your switch next to your home’s electrical panel load center and then
you’ll connect circuit breaker wires to the transfer switch’s circuits. Once you
power up your portable generator, you will manually turn on each switch and that
generator energy is transferred as electrical power and goes through the house
circuits you have previously chosen.
Your EmerGen Switch is easy for a licensed electrician or qualified
professional to install, safe for a homeowner to operate, and will work with
120/240V single phase AC generators, factory equipped with NEMA type
receptacles L14-20R or L14-30R , depending on the size EmerGen Switch you have
chosen.
Your EmerGen Switch cannot permit connection to both utility and generator
power at the same time.
Product Outline / Specifications
Page 3
Safety Information
Installation Preparation
Page 4
Wattage Requirements
Page 5
Installation Instructions
Page 8
Wiring the EmerGen Switch to the Load
Center
Page 9
Completing the Installation
Page 11
Operation / Test Procedure
Load Management
Page 12
Table of Contents
Trouble Shooting
Page 13
Product Warranty
Page 14
Outdoor Installation
Page 7
Hard-wire Installation
Page 6
Installing 240 volt (2-pole) circuits
Page 10
