ConnectGear GR-104, Руководство пользователя

Страница: 56 / 77

that you wish to setup an Access Control rule. You can
select a range of users simply by inputting the starting
users’ IP address and the last user’s IP address in the
appropriate boxes. If you want to select only one user
then input the user’s IP address in both boxes.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
Client PC Service
You can block the clients from accessing some
Internet services by checking the services you want
to block.
Protocol
This allows you to select UDP, TCP or both
protocol type you want to block.
Port Range
You can assign up to five port ranges. The router
will block clients from accessing Internet services
that use these ports.
Apply Changes
Click “Apply Changes” to save the setting.
Reset
Click “Reset” to clear all fields.
Click < Apply Changes> at the bottom of the screen to save the above configurations. You can
now configure other advance sections or start using the router (with the advance settings in place)
56