MFC INSTALLATION MANUAL
Page
10 of 22
CONNECT
2
CAR.COM
3.
MFC FEATURES
3.1
GENERAL FEATURES:
o
8 outputs - 4 are programmable accessory outputs (ACC 1-4)
o
(ACC 5-8 are negative triggers ONLY these are not programmable)
o
Tachometer input
o
Bluetooth Interface
o
Serial Interface
o
USB charger port, for mobile phone or PDA devices with USB charging cable
o
Status/Indicator LED’s showing power, active serial or Bluetooth Data status
3.2
DETAILED SPECIFICATIONS:
ACC 1-4
+/- Internal Relay (1-4) Output (Max 12v, 30A).
ACCESSORY
CONTROL
ACC 5-8
Negative Triggers (-500mA max) use external
relays if needed.
POWER
12-18V
USB CHARGING
5V (max 5amps)
Bluetooth
Serial Port Profile (SPP) Only
Antenna Power
Class 2 (50ft)
Serial Port
Mechanical: 6’ 9-pin DSUB (FEMALE) connector
MFC UNIT
6.75” x 4” x 1.25”
PHYSICAL
DIMENSIONS
Bluetooth
Antenna
Module
3” x 1.5” x .75”
(with a 3’ cable)
3.3
GENERAL WIRING HARNESS CONFIGURATION:
Figure 5: MFC CONNECTOR DIAGRAM
RED (+) 12V DC Input
BLACK (-) Ground Input
GREEN (+/-) ACC1 Output
YELLOW (+/-) ACC2 Output
PINK (+/-) ACC3 Output
ORANGE (+/-) ACC4 Output
BROWN- Tachometer Input
GRAY (-) 500ma ACC5 Output
LT. BLUE (-) 500ma ACC6 Output
BLUE (-) 500ma ACC7 Output
PURPLE (-) 500ma ACC8 Output
WHITE ACC1-4 (+/-) Input
Top
BLUETOOTH LED INDICATOR
POWER & SERIAL LED INDICATOR
BLUETOOTH ANTENNA
USB CHARGER (MAX 5A)
SERIAL DATA CONNECTOR
N / A
