4.
Choose
Select removable media (floppy, CD-ROM)
and
Include this
location in the search
and
type
A:\WinXP.
Now select
Finish.
5.
The
Found New Hardware Wizard
will repeat steps 1 through 4 to complete the
installation of the WhiteHEAT/USB serial ports. Please follow the on-screen
instructions
6.
Installation is complete when no more dialogue boxes appear.
You can now verify the presence of WhiteHEAT/USB serial ports in your system by
going to
Start - Control Panel – System Properties – Hardware - Device Manager - Ports.
Status LEDs
When you connect the WhiteHEAT/USB to a computer system that is already powered
on, the LED labeled
USB
will blink, confirming the connection of the WhiteHEAT/USB
to the USB port.
Whenever you connect a communication device to a WhiteHEAT/USB serial port, the
corresponding LED will light for that port indicating a connection between the
WhiteHEAT/USB and the communication device.
When there is data communications between the WhiteHEAT/USB and a connected
device, the corresponding port LED and the LED labeled
USB
will blink indicating data
traffic.
Note:
Please contact Connect Tech Technical Support if you require additional information
concerning the installation or operation of your WhiteHEAT/USB.
