Quark Carrier
Users Guide
www.connecttech.com
Document: CTIM-00084
Revision: 0.04
Page 6 of 24
Date: 2020-12-15
INTRODUCTION
Connect Tech’s Quark platform brings a low cost deployable Jetson solution to the market. The Quark’s
design includes 2x Gigabit Ethernet, 1 x USB 3.1 (Gen 2) Type C with OTG support, 2 x MIPI CSI-2, Camera
I2C Control, 6x GPIOs, 2x PWM, 3x UART, 1x CAN, 2x I2C, 1x SPI.
Product Feature and Specifications
Feature
Description
Module Compatibility
NVIDIA® Jetson Nano™ (
PRODUCTION MODULE ONLY
)
NVIDIA® Jetson
Xavier™ NX
Mechanical Dimensions
82.6mm x 58.8mm (3.25" x 2.31")
USB Camera
1x USB 3.1 Gen 2 (Connector: USB Type-C)
MIPI Cameras
2x 2-lane MIPI CSI-2
Connector: 1-1734248-5
•
15-pin FPC 1mm Pitch Connector
•
Same MIPI connector used on Nano Dev Kit
Camera Control Interface
1x I2C (Can be used for Lens Control)
Internal Debug Ports
1x UART for Debug (I/O header)
Storage
1x SD Card Slot
IO – Ethernet
2x 10/100/1000BASE-T Uplink
IO – USB OTG
1x USB 2.0 OTG for Flashing Capability (Type C)
IO – UART Debug
1x Debug UART (I/O header)
IO – UART
2x UART (I/O header)
IO – CAN
1x CAN bus (I/O header) – Supported by Jetson Xavier™ NX only
IO – I2C
2x I2C bus (I/O header)
IO – SPI
1x SPI bus (I/O header)
IO – GPIO / PWM
8x GPIO (I/O header) – 1x PWM Capable
Power – RTC Battery
3-Pin RTC Battery Connector (Rev C and onwards)
Operating Temperature
-25°C to +85°C (-13°F to +185°F)
Weight
33 Grams (1.16oz)
Warranty and Support
1 Year Warranty and Free Support