Orbitty Carrier for Jetson™ TX1
Users Guide
www.connecttech.com
Document: CTIM-00471
Revision: 0.05
Page 19 of 27
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2016/12/01
Push Button Details (SW1, SW2, SW3)
The Orbitty Carrier has a 3 tactile push buttons - Power (SW1), RESET (SW3) and RECOVERY (SW2).
Switch Designator
Description
SW1
Power Button
-
When Orbitty is in “ATX Mode” a button press will initiate boot-up
sequence
-
When Orbitty is ON, a button press will initiate a power down sequence
in the Operating System
-
When Orbitty is ON and button is held for 5 seconds the system will do a
hard power off (power down ungracefully)
SW3
Reset Button
-
When button is pressed the system will initiate a Reset sequence
SW2
Recovery Button
-
Use this button to perform the Force Recovery Procedure detailed in the
Software Section of this manual.
-
This is required when flashing a new image onto the TX1 module via the
USB OTB port.
