Rudi Embedded System for NVIDIA Jetson TX2 and TX1
Users Guide
Document: CTIM-00479
Revision: 0.06
Page 21 of 34
Connect Tech Inc. 800-426-8979 | 519-836-1291
Date: 2018-01-19
Force Recovery Mode
USB OTG Port of the Rudi can be used to reprogram the TX2/TX1 when put into force recovery mode. To
enable force USB recovery mode using the Rudi Embedded System follow the steps below:
1)
Power down the system completely. The system power MUST be OFF, not in suspend or sleep mode.
2)
Connect the OTG USB port to another host device that will be supplying the new system file.
3)
Using a paper clip or similar depress the Recovery button
4)
Power on the system with the Recovery button still depressed. After three (3) seconds release the
Recovery button.
5)
The TX2/TX1 will show up on the host system as a new NVIDIA Target device.
6)
After successfully updating the system software, power off the system. A clean power up will revert the
OTG port back into host mode.
RTC Battery
Included in the Rudi Embedded System is a BR2032 coin battery to provide RTC backup power for the
TX2/TX1.
Information about battery life can be found in CTI App Note CTIN-00009
http://www.connecttech.com/pdf/CTIN-00009.pdf.
The battery is a Poly-carbonmonofluoride Lithium coin cell, some details can be found below.
