Connect Tech - COM Express Type-6 PMC/XMC Carrier Board - User Manual
Revision 0.03
35
Typical Hardware Installation Procedure
1.
Ensure all external system power supplies are off.
2.
Install the COM Express module. Be sure to follow the manufacturer’s direction for proper
heatsink/heatspreader installation and any other cooling instructions from the manufacturer.
3.
Install the necessary cables for the application. At a minimum, this would include:
a)
Power cable to the input power connector.
b)
Connect a video display cable to one of the video channels.
c)
Keyboard and mouse via USB
d)
SATA Power and Signal to SATA HDD
For the relevant cables, see the Cables & Interconnect section of this manual
4.
Connect the power cable to power supply
5.
Ensure your power supply is in the range of +6V to +36V DC.
6.
Switch on the power supply.