ConMed LS7700, Руководство по обслуживанию

Страница: 24 / 42

10
3.0
MAINTENANCE
Regular maintenance of your light source is
limited to: 1) keeping the intake vents free of
dust and dirt and 2) replacement of the lamp,
when needed. No other service is required.
3.1 Life Expectancy
The standard warranty for this product is twelve
months. The life expectancy of this product is
expected to meet or exceed this period under
normal use and standard care.
3.2 Cleaning
1. Unplug the light source and allow it and the
fiber optic light guide to thoroughly cool
before cleaning.
2. Wipe the exterior of the light source and
fiber optic light guide with a clean, soft
cloth dampened (not dripping) with a mild
detergent. Wipe again with distilled or
sterilized water. Dry with a clean, lint-free
towel.
3.3 Lamp Replacement
The following maintenance procedures should
only be performed by qualified service
personnel. Read all warnings and cautionary
notices carefully before performing any service
procedures.
WARNINGS:
• Disconnect the main power cord before
attempting any service to the lamp or
lamp connections.
• Wear a face shield or protective safety
eye glasses and inspection gloves when
handling the lamp.
• Do not touch the lamp until it
has cooled to room temperature.
Severe burn may result.
• The Xenon lamp is under extremely high
pressure. Do not subject the lamp to
mechanical forces or rough handling that
could fracture the lamp, as this may
result in an explosion.
• Do not leave finger prints or any other
residue on the lamp reflector surface or
the bulb. Contamination on this surface
may cause damage to the bulb.
HOT
CAUTION