CB1000 - stand alone Bluetooth reader (480030)
Art. No. 490030
Art. No.: 460116
This multi-purpose code and Bluetooth reader works as a stand alone system consist
of: A CB1200 and a Wiegand Controller (see the manual for the Wiegand Controller).
The Wiegand Controller has a Master Code. By help of that you can bring the control
-
ler in enroll mode.
The keep the mobile near the reader and turn on the Bluetooth. A green flash will con
-
firm the succesful programming. Then the mobile phones as well as a programmed
code will activate the relay in the controller.
The Wiegand Controller can also be programmed by a PC (software is included). The
controller has a log (3500 events) and relays for the door and alarm as well as a door
control and door opener (REX).
Please take a look at the Wiegand Controller manual, page 2 - 4.
Note: The mobile phone activates the reader to open the door. To activate again
the mobile phone has to be out of range for 10 - 12 seconds.
Enabling Bluetooth visibillity on mobile phones
In order to use the Bluetooth reader, your mobile phone’s Bluetooth must be active.
The easiest way to do this is by downloading the app:
BluetoothMyID
(free).
Just open the app and your mobile phone’s Bluetooth is visible.
Thank you for choosing Conlan’s products.
For further assistance, please contact
Our support service.
