Page 4
CB 1200
CB 1000 - stand alone Bluetooth reader (Art. No.: 480030)
Art. No.:490030
Art. No.: 460116
This multi-purpose reader Code and Bluetooth working as a stand alone system consist of:
A CB 1200 and a Wiegand Controller (see the instruction for the Wiegand Controller).
The Wiegand Controller has a master code. By help of that you can bring the controller in
enroll mode.
Then keep the mobile near to the reader and turn on the Bluetooth. A green flash will
confirm the succesful programming. Then the mobile as well as a programmed code wil
activate the relay in the controller.
The Wiegand Controller can also be programmed by a computer (software is included).
The controller has a log (3500 events) and relays for the door and alarm as well as a door
control and door opener (REX).
Please take a look at the Wiegand Controller manual, page 2 - 4.
Note: The mobile activate the reader normally to open the door. To activate again
the mobile has to be out of range for 10 - 12 seconds.
Enabling Bluetooth visibillity on Mobiles
In order to use the Bluetooth reader, your mobile's Bluetooth must be active. The easiest
way to do this is by downloading the app:
BluetoothMyID
(free).
Just open the app and your mobile's Bluetooth is visible.
Thank you for choosing CONLAN's products.
For support, please contact us at [email protected].
