3
1. Introduction
C1000 is a flexible keypad and Mifare reader in one unit for many different
applications.
In standby the yellow LED is lit (
●
○ ○)
By correct code the yellow and the green LED lights (
●
●
○)
By incorrect code the red LED is lit (
○ ○
●
)
C1000 has a buzzer for indicating while keying, correct code, incorrect etc. and 2 tran
-
sistor outputs, independant from each other, so the C1000 can give access by code.
The C1000 is a stand alone unit, the can be programmed directly by Master code and
Service code.
2. Installation
Mount the reader on a even surface. (use the following drill template for precise fit
-
ting).
Connect the wires to power supply, door strike, assembly board etc.
Colour scheme
Red:
9 - 25V DC /30mA
Black:
0V GND
Yellow:
Output 2 (open collector, max. 500mA) 0V active
White:
Output 1 (open collector, max. 500mA) 0V active
Orange:
External controlling red LED, 0V active
Green:
External controlling green LED, 0V active
Blue:
REX, 0V active
Brown:
High security / external buzzer
Note:
Right after applying the voltage all the LED’s lights and the buzzer sounds
do not
touch the reader untill the yellow LED lights and the buzzer is silent.
See connection examples on the last page.
