Conker NS12, Руководство пользователя

Страница: 7 / 7

Ba � ery Informa � on
CAUTION. Use only approved ba � eries. Risk of explosion if ba � ery is charged with an incompa � ble charger, exposed to heat
>60C or replaced by an incorrect type.
European Ba � ery Direc � ve 2006/66/EC
Dispose of ba � eries separately and responsibly. All waste ba � eries are classi fie d as hazardous waste and should be disposed of
at a ba � ery recycling centre.
Our rechargeable ba � ery packs are designed and constructed to the highest standards within the industry. However, there are limita �o ns
to how long a ba � ery can operate or be stored before needing replacement. Many factors a ff ect the actual life cycle of a ba � ery pack, such
as heat, cold, harsh environmental condi �o ns and severe drops. Ba � eries are considered chemical products. As such, ba � ery performance
will deteriorate over � me if stored for a long period of � me without being used. When ba � eries are stored over six (6) months, some
irreversible deteriora �o n in overall ba � ery quality may occur. Store ba � eries at half of full charge in a dry, cool place, removed from the
equipment to prevent loss of capacity, rus � ng of metallic parts and electrolyte leakage. When storing ba � eries for one year or longer, the
charge level should be veri fi ed at least once a year and charged to half of full charge.
Replace the ba � ery when a signi fi cant loss of run � me is detected. Standard warranty period for all ba � eries is one year from order
ful fi lment, regardless if included as part of a mobile computer with a longer warranty dura �o n or ongoing maintenance contract. The cycle
life of ba � eries will vary according to the charge and discharge condi �o ns, the temperature and other usage condi �o ns. When used in
accordance with the IEC charge and discharge speci fi ca �o ns the typical cycle life of a ba � ery is between 300 and 400 cycles at room
temperature. Individual results may vary.
Lithium ba � eries do not su ff er from “ba � ery memory” therefore you do not need to fully charge to 100% or fully discharge to 0%. Complete
discharge of ba � eries should always be avoided. Shallow discharge is preferable, i.e. recharge at 20% if possible.
Ba � ery Safety Guidelines

The area in which the units are charged should be clear of debris and combus � ble materials or chemicals.

Improper ba � ery use may result in a fire , explosion, or other hazard.

To charge the mobile device ba � ery, the ba � ery and charger temperatures must be between 0°C and +40°C (+32°F to +104°F).

Do not use incompa � ble ba � eries and chargers. Use of an incompa � ble ba � ery or charger may present a risk of fire , explosion,
leakage, or other hazard. If you have any ques �o ns about the compa � bility of a ba � ery or a charger, contact Tablet
Technologies support.

For devices that u �l ize a USB port as a charging source, the device shall only be connected to products that bear the USB-IF
logo or have completed the USB-IF compliance programme.

Do not disassemble or open, crush, bend or deform, puncture, or shred.

Severe impact from dropping any ba � ery-operated device on a hard surface could cause the ba � ery to overheat.

Do not short circuit a ba � ery or allow metallic or conduc � ve objects to contact the ba � ery terminals.

Do not modify or remanufacture, a � empt to insert foreign objects into the ba � ery, immerse or expose to water or other
liquids, or expose to fire , explosion, or other hazard.

Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or near a radiator or
other heat source.

Do not place ba � ery into a microwave oven or dryer.

Ba � ery usage by children should be supervised.

Please follow local regula �o ns to promptly dispose of used re-chargeable ba � eries.

Do not dispose of ba � eries in fire .

Seek medical advice immediately if a ba � ery has been swallowed.

In the event of a ba � ery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash
the a ff ected area with large amounts of water and seek medical advice immediately.

If you suspect damage to your equipment or ba � ery, contact Tablet Technologies support to arrange for inspec �o n.
Class 2 Laser Product – Honeywell N4300 1D Laser Barcode Scanner
Safety Standards:
EN 60950-1:2005/Am1:2009,
IEC 60950-1:2006/A11:2009/A1:2010/A12:2011
Laser Safety Statement
This device has been tested in accordance with and complies with IEC 60825-1 ed2.0.
LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT,1.0 mW MAX OUTPUT: 650nm.
Engine Laser Beam:
Wavelength 650 nm
Max power output 1mW
The laser diode is considered an embedded laser. Intrabeam viewing of the laser shall be prevented.