16
2. Configuration by using Telnet
Connect by Telnet with port 9999. Telnet is a software- tool of your operation sys-
tem. t Bestandteil Ihres Betriebssystems und kann (e.g. Windows XP, Windows 7
and Windows 8)
telnet 192.168.1.100 9999
Additional hints for the configuration of the LAN- port are described on the PDF:
Xport- User- Guide
9. Setup of a modem- connection
Start Telnet in ordert o access the modem by IP (IP-address and Port). E.g. the
default settings when the modem is delrvered (192.168.1.100 10001):#
telnet 192.168.1.100 10001
After a successful setup of the telnet- connection the use of the modem (GSM /
GPRS or UMTS, depending of the modem-version) with AT-commands is possible.
Which AT-commands are available and how those can be used is described in the
AT-command Manual (PDF on product- CD).
Following a few basic AT- commands are described (PIN-entering, Check network
status, signal quality, Sending of a SMS). The modem is able to perform several
additional functions (sending e-mail, FTP, encryption, etc.) that are described de-
scribed in the AT-command Manual (PDF on product- CD).
10. Examples for basic AT- commands
PIN-number
Check by “AT+CPIN?” if a PIN-number has been already entered, or enter the PIN-
number by using “AT+CPIN="xxxx“”. The PIN has to be typed in with quotation
marks!
