CONIA CL1901HDVDR, Инструкция по эксплуатации, Страница: 7 / 30

Product Introduction
Product Introduction
Front View
Rear View
MENU: Display/exit the OSD menu.
CH+/-: Scan through channels.
VOL+/-: Adjust the volume.
TV/AV:
Display the input source menu.
POWER:
Turn on/standby the TV set.
Remote Control window(keep clear)
(IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby) LED indicator: Press POWER to turn on and off.
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 30
0
to the left or right side and 20
0
above or below the control
window.
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
Connections
See next page
Wall Mounting
The TV is provided with mounting holes for a VESA approved wallmounting bracket (NOT SUPPLIED).
Remove the Posi screws holding the base to the base bracket and lift the base away (do not remove the
basemounting bracket).Mount the VESA bracket using 4xM4x10mm ISO metric threaded screws (not
supplied). Do not use screws longer than 10mm, it will occur damage to the internal parts. Fit the wall
bracket securely following themanufacturers instructions.
4
EJECT
: Press the key to eject the disc.
PLAY : Press the key to play/pause the DVD.
Insert a 12cm disc according
to the silk.
MENU CH
-
CH
+
VOL
-
VOL
+
TV
/
AV PLAY EJECT
LED indicator