PHASE 3
WOODROOD FRAME ATTACHMENT
* MONKEY FORT SECTION *
STEP 1: Gather parts and hardware shown in table 3.
STEP 2: Attach roof support
'MA'
to the uprights
with 05/16"x5" hex bolt and
05/16" flat washers.
Make sure roof support
'MA'
are square and level
before tigthening the hex bolts and moving
to the next step.
STEP 3: Place Roof Support bracket as shown below.
Please note there is a left and a right
bracket. Mark the center of the holes and
using a drill with 01/i
6
"
drill bit, drill a pilot
hole 2" deep to roof support
'MA'.
TABLE 3 - PARTS AND HARDWARE
ID LETTER DESCRIPTION
MA
ROOF SUPPORT - 2"x4"x15-5/8"
5/16 x 5" HEX BOLTS
5/16 FLAT WASHERS
LEFT AND RI
GHT SUPPORT BRACKETS
STEP
4:
Attach support bracket to roof support board
"MA" with 5/16" x 1 1/2" lag screw and 5/16" flat washer.
Repeat step 3 and 4 with the other
roof support
'MA'.
QTY
2
2
1
0
2
5/16 x 1 1/2" LA
G SCREW (8)
