
Installation Tips
1. Assem'11y of your playsystem will take 16-18 hours depending on your
level
of experience. Assembly will req,uire
an adult helper.
2. Empty each box and organize the boards alphabetically. When you
are
finished organizing the boards
complete an inventory to
be
certain that you
have received
all of the parts.
3. Sort all of the hardware in a large box or container. This will
reduce
the chance of losing small parts.
4. Pay close attention to the length and diameter of bolts and screws. There
are
different sizes in the
same bag that look alike. To correctly identify hardware, match it up to the "actual size" drawings
located
in the hardware identification section.
5. Gather all of the tools listed in the "tool list" section
before
you start.
6. Read all of the instructions thoroughly. This playsystem cannot
be
installed using only the illustrations.
7. Complete each step
before
moving on to the next. Jumping ahead in the instruction manual
can be
unsafe
and
create
extra work.
8. Retain this manual for future
reference.
Keep it in a safe place where you
can
refer to it as
needed.
Maintenance Instructions
1. Check all nuts and bolts twice monthly during the usage season for tightness and tighten as req,uired.
It is Particularly important that this procedure
be
followed at the beginning of each season.
2.
Remove
plastic swing seats and take indoors or
do
not use when the temperature drops below 40F.
3. Oil all metallic moving parts monthly during the usage period.
4. Check all coverings for bolts and sharp
edges
twice monthly during usage season to
be
certain they
are
in place.
Replace when necessary. It is especially important to
do
this at the beginning of each new season.
5. Check swing seats, ropes, cables, and chains monthly during usage season for
evidence
of deterioration.
Replacement should
be made
if deterioration or
damage
is found.
6. Sand rusted areas on tubular members and repaint using a nonlead-based paint meeting the req,uirements of
Title 16 CFR Part 1303
7. Apply
B
oeshield to brackets and metal hardware every 6 months to 1 year depending on your location. For
coastal areas apply every 4 months. One can is provided with your set.
Disposal Instructions
1. Disassemble and dispose of the playsystem in such a way that no unreasonable hazards will exist at the
time of disposal.
Содержание CONGO Series
Страница 1: ...PACKACif 4 5HOWN MONKC Y PlAY5Y5ffM CONLlO 5C R C 5 A55 MB Y IN5fRUCflON5 Rev 01 18 2019...
Страница 4: ......
Страница 8: ......