QF033CR
ENGLISH
6
Installation (continued)
-
Connect the water supply lines (4) (not
supplied) to the faucet shanks (2) using a
wrench . Do not over tighten .
-
Loop supply lines (11) if they are too long.
-
Secure metal nuts (12) of the supply
lines (11) to corresponding supply valves.
Tighten the nuts (12) by hand until they
are snug. Then tighten the nuts (12)
with a wrench .
Faucet shanks (2)
1/2" NPS thread
1/2" FIP water
supply line
compatible
(not supplied)
To Hot Water
Supply Valve
To Cold Water
Supply Valve
Supply
Lines (4)
Sink
11
12
13
Fig . 4
Fig . 5
