Imported by:
St-Laurent, Quebec H4S 2C3
www.conglomkb.com
1-877-333-0098
Made in China
Fig. 9
Supply line connection
Supply line (L)
Refill tube
Shut off valve
Adjusting screw
Waterline
Flush valve seal
Flush
valve
seat
Fig. 8
2
I N S TA L L AT I O N
R E P A I R
C A R E
W A R R A N T Y
QT016
Brenna
High efficiency dual flush toilet
9. Connect the supply line “L” directly onto the threaded supply line connection of the fill
valve until it is hand tight. Open the shut off valve to fill the tank, and check for
leaking. If there is leaking from around the supply line connection then tighten the
supply line “L” until the leaking stops. DO NOT OVER TIGHTEN (see Fig. 9).
10. The fill valves are pre-calibrated at the factory, however variations in water pressure
will affect the final water level. In order to ensure proper performance, it is very
important that the water level is adjusted to the level indicated on the overflow tube
or tank liner. To lower or raise the water level for this type of valve, turn the adjusting
screw (see Fig. 9).
11. Check for leaks.
12. Install seat.
REPAIRS
All replacement parts, except for dual flush valves, are available at any plumbing retailer.
Please contact your local plumbing retailer for help. For the dual flush valve versions,
please contact our customer service department at 1-877-333-0098 (Monday to Friday,
8:30 am to 5:00 pm, EST).
CARE AND CLEANING
For general cleaning, use a mild, nonabrasive soap and warm water. Do not use abrasive
cleaners (such cleaners contain sand or silica that will scratch the china surface).
Common bowl cleaners may be used on the china surface of the bowl. Do not use
“in-tank” bowl cleaners because they can contain aggressive chemicals that attack the
tank components (see warranty exclusions).
HOME USE WARRANTY
This product is guaranteed to be free from structural and manufacturer defects for
the applicable warranty period shown below. This non-transferable guarantee
applies only to the original purchaser and proof of purchase is required for all
claims.
5 year limited warranty on fittings
20 year limited warranty on ceramic components
Exclusions
This warranty excludes defects resulting from:
• Improper installation whereby Conglom Kitchen & Bath’s installation instructions
are not followed correctly
• If it has been altered in any way after shipping
• If it has been used for any application other than for home use
• Improper maintenance resulting from failure to reasonably clean, care for or
maintain a product in accordance to Conglom Kitchen & Bath’s cleaning
instructions
• USE OF ANY TOILET CLEANERS THAT ARE APPLIED IN THE TOILET TANK WILL
VOID THE WARRANTY (in-tank cleaners can damage the rubber, metal and/or
plastic components causing leaks and reducing performance)
Warranty claim procedure
If a claimable defect occurs, please fill out a claim form through our website at:
www.conglomkb.com or contact our customer service department at 1-877-333-
0098 (Monday to Friday, 8:30 am to 5:00 pm, EST).
Before you make your claim call, please make sure you have:
1. The description of the toilet
2. Proof of sale
3. Details regarding the defect
4. Name and address of the owner and installer
Claims must be filled out in writing and returned within six (6) months of appear-
ance of defect. Failure to comply with this stipulation will make the warranty null
and void. We reserve the right to a thirty-day (30) delay following receipt of claim in
which to inspect the product. We assume no responsibility for labor costs or
removing/replacing a previously installed product or transportation or return of a
product.
0025S
