Preface
This user's guide provides information about the components, features, connectors and
BIOS Setup menus available on the conga-XLX. It is one of four
documents that should
be referred to when designing an XTX
TM
application. The other reference documents
that should be used include the following:
XTX™ Design Guide
XTX™ Specification
ETX
®
Design Guide
The links to these documents can be found on the congatec AG website at
www.congatec.com
Disclaimer
The information contained within this user's guide, including but not limited to any
product specification, is subject to change without notice.
congatec AG provides no warranty with regard to this user's guide or any other
information contained herein and hereby expressly disclaims any implied warranties of
merchantability or fitness for any particular purpose with regard to any of the foregoing.
congatec AG assumes no liability for any damages incurred directly or indirectly from
any technical or typographical errors or omissions contained herein or for discrepancies
between the product and the user's guide. In no event shall congatec AG be liable for
any incidental, consequential, special, or exemplary damages, whether based on tort,
contract or otherwise, arising out of or in connection with this user's guide or any other
information contained herein or the use thereof.
Intended Audience
This user's guide is intended for technically qualified personnel. It is not intended for
general audiences.
Symbols
The following symbols are used in this user's guide:
Warning
Warnings indicate conditions that, if not observed, can cause personal injury.
Caution
Cautions warn the user about how to prevent damage to hardware or loss of data.
Note
Notes call attention to important information that should be observed.
Copyright © 2006 congatec AG
X800m12
3/72
