Copyright
©
2019
congatec
AG
SX8X_SDS_q11
4/8
1
Hardware
1.1
Sample Distribution Set Contents
The contents of the conga-SMX8-X (Prototype Revision Y.1) sample
distribution set are listed below:
Part #
Rev. Name
Description
Qty
007010
C.0
conga-SEVAL
Evaluation carrier board for standard
SMARC modules based on SMARC
Specification 2.0
1
051100
or
051103
Y.1
conga-SMX8-X/QXP-4G
eMMC16 (Prototype)
or
conga-SMX8-X/QXP-2G
eMMC16 (Prototype)
SMARC 2.0 prototype module with
NXP i.MX 8QuadXPlus applications
processor, 16 GB onboard HS400
eMMC, and 4 GB or 2 GB LPDDR4
onboard memory.
1
051050
X.0
conga-SMX8/i-CSP-B
Passive cooling for SMARC 2.0 module
conga-SMX8. All stand-offs are bore
hole 2.7 mm.
1
011115
B.0
conga-LDVI/EPI
LVDS to DVI converter board for digital
flat panels with onboard EEPROM.
1
033331
A
cab-LVDV-DAT-34-15
15 cm data cable LVDS to DVI adapter
1
052147
A
cab-LVDV-PWR-10-15
15 cm power cable LVDS to DVI adapter
1
48000023
A
RS232 adapter cable
MOLEX 6-pin PicoBlade to 2x D-SUB 9
adapter
1
10000285
A
MicroSDHC-Card UHS-I
Kingston industrial SDCIT/EU Class 10
8 GB microSD card with SD card adapter
and preinstalled image.
1
N/A
1.1
Quick Start Guide
conga-SMX8-X Sample Distribution Set
Quick Start Guide
1
1.2
conga-SMX8-X
The conga-SMX8-X (Prototype Revision Y.1) included in this sample
distribution set is a SMARC 2.0 prototype module featuring the NXP
i.MX 8QuadXPlus applications processor, 16 GB HS400 onboard eMMC,
and 4 GB or 2 GB LPDDR4 onboard memory.
For information about the Mass Production (MP) variants, refer to the
datasheet available at www.congatec.com.
1.2.1
Pinout Description
The conga-SMX8-X (Prototype Revision Y.1) pinout description is available
at the link below. The pinout description lists which signals of the NXP i.MX
8QuadXPlus applications processor are routed to the SMARC connector.
https://git.congatec.com/imx8x_early_access/imx8x_sx8x_pinlist
Note
Contact congatec technical support to get access to this folder.
1.3
conga-SEVAL
The conga-SEVAL (Revision C.0) included in this sample distribution set is
an evaluation carrier board based on the SMARC Specification 2.0.
For information about the conga-SEVAL, refer to the User's Guide available
at www.congatec.com.
