Copyright
©
2017
congatec
AG
SEVALm10
17/58
3.4.3.4
Power Monitoring (VIN_PWRBAD#)
Use jumper X60 to select the power rail that notifies the module that the operating voltages are within ranges required for operation.
Table 7
Jumper X60 Description
Pin
Configuration
1-2
5 V ATX power good signal (only for debugging)
3-4
Carrier board power good signal (M23, M24)
5-6
+3.3V ATX power good signal
7-8
Module power good signal (M25, M26)
2-4
No VIN PWRBAD# control
Connector Type
X60: 2.54 mm, 2x4 pin header
3.4.3.5
Module Power Path
When you power the module via M25 and M26, use jumper X61 to configure how the conga-SEVAL handles the switching of the module’s
power path.
Table 8
Jumper X61 Description
Pin
Configuration
1-2
Automatic
2-3
AT_SMARC
Note
Setting jumper X61 to position 2-3 switches the module’s power path to connector M25 and M26, even if the conga-SEVAL is powered via
M23 and M24.
Connector Type
X61: 2.54 mm grid jumper
Jumper X60
1
3
6
5
8
7
2
4
2
3
1
Jumper X61
