Copyright
©
2016
congatec
AG
TR33m10
74/105
11.3.2
Graphics Submenu
Feature
Options
Description
Primary Graphics Device
IGD
PEG/PCIe
Select primary graphics adapter to be used during boot up.
IGD: Internal Graphics Device.
PEG/PCIe: Try to use external PEG or PCI Express Graphics Device. If not present, IGD is used.
Integrated Graphics Device
Auto
Disabled
Force
Deactivate IGD or select framebuffer configuration mode.
In auto mode, the framebuffer size will be defined based on the amount of physical memory present.
Force mode will enable IGD regardless of external GPU present or not.
IGD Framebuffer Size
32M
64M
128M
256M
512M
1G
Only visible if IGD is set to forced configuration.
Set fixed graphics framebuffer size for IGD. The graphics driver might allocate additional memory.
LFP/DDI0 Interface
Disabled
LFP
DDI0 Auto Selection
DDI0 Force HDMI/DVI
Enable or disable the local flat panel (LFP) or Digital Display Interface 0 (DDI0).
Availability of LFP or DDI0 depends on board part number. See DDI1 Interface description below to
understand DDI0 settings.
Always Try Auto Panel
Detect
No
Yes
If set to 'Yes' the BIOS will first look for an EDID data set in an external EEPROM to configure the
Local Flat Panel . Only if no external EDID data set can be found, the data set selected under 'Local
Flat Panel Type' will be used as fallback data set.