Congatec COM Express conga-TC175 Скачать руководство пользователя страница 21

Страница: 21 / 71

2017

congatec

TCKLm10

21/71

Note

The gap pad material used on all congatec heatspreaders contains silicon oil that can seep out over time depending on the environmental

conditions it is subjected to. For more information about this subject, contact your local congatec sales representative and request the gap

pad material manufacturer’s specification.

Caution

The congatec heatspreaders/cooling solutions are tested only within the commercial temperature range of 0° to 60°C. Therefore, if your

application that features a congatec heatspreader/cooling solution operates outside this temperature range, ensure the correct operating

temperature of the module is maintained at all times. This may require additional cooling components for your final application’s thermal

solution.

For adequate heat dissipation, use the mounting holes on the cooling solution to attach it to the module. Apply thread-locking fluid on the

screws if the cooling solution is used in a high shock and/or vibration environment. To prevent the standoff from stripping or cross-threading,

use non-threaded carrier board standoffs to mount threaded cooling solutions.

For applications that require vertically-mounted cooling solution, use only coolers that secure the thermal stacks with fixing post. Without the

fixing post feature, the thermal stacks may move.

Also, do not exceed the maximum torque specified for the screws. Doing so may damage the module or/and the carrier board.

Содержание COM Express conga-TC175







































































Результаты поиска

Содержание COM Express conga-TC175

Отзывы:

Congatec COM Express conga-TC175, Руководство пользователя, Страница: 21 / 71

Результаты поиска

Содержание COM Express conga-TC175

Отзывы: