manualshive.com logo in svg

Congatec 065810, Руководство пользователя

Поделиться
Скачать
Congatec 065810 Скачать руководство пользователя страница 4

Copyright 

© 

2018 

congatec 

AG 

 

      TEVA2m11 

       

4/56

Symbols

The following symbols are used in this user’s guide:

 

Warning

Warnings indicate conditions that, if not observed, can cause personal injury.

 

Caution

Cautions warn the user about how to prevent damage to hardware or loss of data.

 

Note

Notes call attention to important information that should be observed.

 

Connector Type

Describes the connector that must be used with the congatec COM Express™ evaluation carrier board, not the connector found on the 

congatec COM Express™ evaluation carrier board.

 

Link to connector layout diagram

This link icon is located in the top left corner of each page. It provides a direct link to the connector layout diagram on page 8 of this document.

Copyright Notice

Copyright © 2018, congatec AG. All rights reserved. All text, pictures and graphics are protected by copyrights. No copying is permitted 
without written permission from congatec AG.

congatec AG has made every attempt to ensure that the information in this document is accurate yet the information contained within is 
supplied “as-is”.

Содержание 065810

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды