manualshive.com logo in svg

Congatec 050300, Руководство пользователя

Поделиться
Скачать
Congatec 050300 Скачать руководство пользователя страница 35

Copyright © 2021 congatec GmbH  

      TCTLm02 

       

35/67

6.2.1 

OEM Default Settings

This feature allows system designers to create and store their own BIOS default configuration. Customized BIOS development by congatec for 
OEM default settings is no longer necessary because customers can easily perform this configuration by themselves using the congatec system 
utility CGUTIL. See congatec application note AN8_Create_OEM_Default_Map.pdf on the congatec website for details on how to add OEM 
default settings to the congatec Embedded BIOS.

6.2.2 

OEM Boot Logo

This feature allows system designers to replace the standard text output displayed during POST with their own BIOS boot logo. Customized 
BIOS development by congatec for OEM Boot Logo is no longer necessary because customers can easily perform this configuration by 
themselves using the congatec system utility CGUTIL. See congatec application note AN8_Create_And_Add_Bootlogo.pdf on the congatec 
website for details on how to add OEM boot logo to the congatec Embedded BIOS.

6.2.3 

OEM POST Logo

This feature allows system designers to replace the congatec POST logo displayed in the upper left corner of the screen during BIOS POST 
with their own BIOS POST logo. Use the congatec system utility CGUTIL 1.5.4 or later to replace/add the OEM POST logo. 

6.2.4 

OEM BIOS Code/Data

With the congatec embedded BIOS it is possible for system designers to add their own code to the BIOS POST process. The congatec 
Embedded BIOS first calls the OEM code before handing over control to the OS loader.

Except for custom specific code, this feature can also be used to support verb tables for HDA codecs, PCI/PCIe OpROMs, bootloaders, rare 
graphic modes and Super I/O controller initialization. 

 

Note

The OEM BIOS code of the new UEFI based firmware is only called when the CSM (Compatibility Support Module) is enabled in the BIOS 

setup menu. Contact congatec technical support for more information on how to add OEM code.

6.2.5 

OEM DXE Driver

This feature allows designers to add their own UEFI DXE driver to the congatec embedded BIOS. Contact congatec technical support for more 
information on how to add an OEM DXE driver.

Содержание 050300




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды