Confycare EL12, Быстрый старт

Страница: 5 / 16

EN
3
1
2
3
EL12 Electrical Hi-Lo & Tilt Table
OPERATION
Figure 1: Table in working position.
Locked
Locked / release Figure 1
Red side down
When installing the activity table do not relax
your hands before the activity table is fixed
to avoid accidental slippage and cause
injury.
● insert the square rod of activity table into the
Figure 2: Table in a moving position . square tube , adjusting the square rod to
the right distance then tighten the knob to fix.
● To adjust the height of the activity table
tighten the knob
on the bracket to fix it
in place.
Release
Release
Figure 2
Flat
Adjusting the footboard plate
Foot
Connect the table to an electrical outlet using the
power cord.
Motor functions
● Hand controller for adjusting height & tilt.
● Before adjusting, make sure there are no objects
in the space below the table that could cause
collisions or entrapment.
● Press LINE 1 on the controller panel
to
adjust the height of the table.
Before adjusting make sure the table is in the
non-tilting position.
● release the bolt
2 then adjusting the
supporting rod
3
.
● the footboard can be adjusted to suit the desired
angle Increment depends on the patient’s need.
Fixation straps
● Press LINE 2 on the controller panel to
adjust the tilt of the table.
Chest strap
Waist strap
Leg straps
Fix and adjust the activity table
Tighten the belts by fastening the straps.
The position of the straps can be moved up and
down along the square tube.
Knob
1
Square Tube
3
Knob
2
board
1
Bolt
2
Supporting rod
3
Height adjust of the table
Tilting adjust of the table