CONFORAMA SABA LFS1214MI18W, Руководство пользователя

Страница: 35 / 38

1. Open the lower cover
cap
2. Rotate 90°C and pull
out the emergency drain
hose, and take off the
hose cap
3. After water runs out,
reset the drain hose
4. Open the filter by
turning to the counter
clockwise
5. Remove extraneous
matter
6. Close the lower cover
cap
Caution!
• Make sure that valve cap and emergency drain hose are
reinstalled properly, cap plates should be inserted aligning
to hole plates otherwise water may leak.
• Some machines don’t have emergency drain hose, so
step 2 and step 3 can be skipped. Rotate lower cover cap
directly to make water run into basin.
• When the appliance is in use and depending on the
programme selected there can be hot water in the pump.
Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is
empty. When replacing the cover, ensure it is securely re-
tightened.
'
1. Pull out the
dispenser drawer
with press the A
2. Clean the
dispenser drawer
under water
3. Clean inside the
recess with an old
toothbrush
4. Insert the
dispenser drawer
Note!
• Do not use alcohol, solvents or chemical products to clean
the machine.
Cleaning The Drain Pump Filter
Warning!
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before
washing.
• Drain pump filter can filter the yarns and small foreign
matters from the washing.
• Clean the filter periodically to ensure the normal operation
of washing machine.
(Emergency
drain hose)
67 66
GB GB