M/ST18/E
07
2016
INSTALLATION AND MAINTENANCE MANUAL
PRESSURE TRANSMITTER
Type ST18
Servicing Department
e-mail
[email protected]
www.conflow.it
Страница 1: ...M ST18 E 07 2016 INSTALLATION AND MAINTENANCE MANUAL PRESSURE TRANSMITTER Type ST18 Servicing Department e mail servicing conflow it www conflow it ...
Страница 2: ...reference EN 61326 EMC 2004 108 CE PED 2014 68 UE IEC 60770 IEC 61298 2 2 Safety Instructions The manufacturer disclaims all responsibility in case of damages caused by the improper use of the product and by the non respect of the instructions reported in this manual Follow carefully the specific safety rules in case of measuring oxygen pressure acetylene inflammable or toxic gas or liquids Discon...
Страница 3: ...haracteristics and the correct installation After installation the user should verify that the instrument is not exposed to any source of heat exceeding the established ambient limits Secure the instrument thread through a special key wrench on the process connection hexagon without grasping the case by the hands Secure the instrument thread through a special key wrench on the process connection h...
Страница 4: ...s are assembled correctly 6 Recalibration and maintenance In some models the zero and the full scale range can be adjusted as follows see figure 3 Connector disassembling see fig 1 Zero adjustment Z Span adjustment S Z zero S span Figure 3 Adjustment 7 Disposal and demolition Dispose of instrument components and packaging materials in an environmentally compatible way and in accordance with the ru...
