Confidence Baby Jogger, Руководство пользователя, Страница: 11 / 13

2. The font axle has a flat area on it that must align with the slots in the front fork.
After aligning the front wheel in the fork slots, slide the wheel all the way into
the front fork and move the leaver into the closed position.
You should feel significant resistance when closing the lever. If you do not, open
the lever and tighten the finger nut further and close the lever again. Continue to
do this until the movement of the lever results in tension on the lever when closing
and the wheel is tight in the frame. When complete, attempt to pull the wheel from
the frame , if the wheel moves, tighten the finger and nut and repeat the test.
(Fig 20) (Fig 21)
Warning: You cannot tighten the quick release lever by merely twisting it. You can only
ensure it is locked by properly tightening the finger nut and then flipping the quick
release lever from open to closed (Fig 20 & 21).
3. Install the handlebars by depressing the spring pin and insert the handlebars until
a click is heard.