Manual Selection of Running Speed
1.
Once the Confidence Power Plus Treadmill is in the standby mode press the On button
once. The control panel will beep and count down from 3 and then the running belt will
start at the default speed of 1.0.
2.
Carefully step onto the moving belt and once comfortable the speed can be increased
by pressing the speed or decreased by pressing the speed button -
3.
The maximum speed the Confidence Power Plus treadmill can be increased to is 10.0.
Adjusting the Running Belt
1.
The running belt on the Confidence Power Plus Treadmill will shift slightly after
continuous use. This is normal for all treadmills.
2.
To straighten/adjust the running belt turn the adjusting bolt on either side of the base,
see figure 1 and 2.
3.
Do not allow for the running belt to catch the sides of the Confidence Power Plus
Treadmill as this will tear the belt.
Maintenance
1.
Before moving or cleaning your Confidence Power Plus Treadmill unplug it from the
main power supply.
2.
Always clean the Confidence Power Plus Treadmill with a damp cloth avoiding the
control panel.
DO NOT USE COURSE CLEANING AGENTS
3.
Clean the power switch and control panel with a soft dry cloth. DO NOT USE
A WET
CLOTH IN THESE AREAS
.
4.
Do not use your treadmill in wet, damp conditions or high dust areas as this can cause
damage to the Confidence Power Plus Treadmill.
5.
Always use the Confidence Power Plus Treadmill on a level surface.
