Confetti Maker TCM357 Скачать руководство пользователя страница 10

 

User documentation The Confetti Maker FX

 

 

Warranty 

The CO2 LED has a 3 year warranty which will be void if the CO2 LED is handled 

differently than described in this manual.  
 
The warranty is void when the CO2 LED has been opened by anyone other than the 

Confetti Maker.  
 

The Confetti maker is not responsible for any paint or hardware damaged as a result 
of rough handling.  

 

CAUTION! Always contact your supplier in case of malfunctions. 

Never try to repair the CO2 LED yourself. 

 

 
 

 
 
 

 
 
 

 
 

 
 
 

 
 
 

 
 

 

 

WARNING 

 

READ THIS DOCUMENT BEFORE INSTALLING OR USING CO2 LED 
 
IMPROPER SELECTION, IMPROPER USE, USE BY ANYONE OTHER THAN TRAINED 
USERS HAVING APPROPRIATE TECHNIAL EXPERTISE OF THE CO2 LED CAN 
CAUSE DAMAGE TO EQUIPMENT OR PROPERTY. 
 

This document and other information from the CO2 LED , its subsidiaries and authorized distributors 

together only provide product installation guidelines and product or system usage options, each of 
which are intended to operate in conjunction with further investigation by trained users having 
appropriate technical expertise to facilitate the safe handling and use of the CO2 LED.  

The CO2 LED is not intended to be used or handled by any users other tan trained users having 
appropriate technical expertise. The information and documentation contained in our catalog and on 
the website, www.theconfettimaker.com, is only provided for technical illustration purposes only and 

may not be used or relied upon as a statement of suitability for use in any particular application. Users, 
through their own analysis and testing, are solely responsible for assuring that the CO2 LED is used in 

Содержание TCM357












Отзывы: