E-mail: [email protected]
Note: For missing or replacement parts, please visit our website at
www.conferplastics.com
30” Patio Table
Parts List
1 – Table Top
1 – Full Leg
2 – Half Leg
1. With the Full Leg and Half Leg in the upside down position
(Figure 1),
slide the groove in
the Half Leg over the tongue in Full Leg as shown
(Figure 2).
Note that the opposite end will
not be secure until it is inserted into the Table Top later in the assembly process
(Figure 3).
2.
While keeping the tongue and groove joint tight
(Figure 4),
slide the groove in the second
Half Leg over the tongue in the Full Leg
(Figure 5).
If desired, add weight to the legs before
final assembly by removing the plugs, located on the top edge of each leg, pour in a small
amout of sand, and replace the plugs.
See other side
Table Top
Full Leg
Half Leg
Figure 1 Figure 2 Figure 3
Figure 4
Figure 5
Leisure Accents
Leisure Accents
