Conexant RCV56 HSF, Руководство пользователя

Страница: 3 / 59

Conexant RCV56 HSF User’s Guide
3
suggested to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the distance between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio TV technician
for help.
Notices:
(1) The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
(2) Shielded interface cables and AC power cord if any must be used in order to
comply with the emission limits.
Notices to Australian users:
The modem card must only be used in a data terminal equipment (DTE) e.g. computer,
that has a screw down cover (lid). As unsafe voltages (TNV) exist on the modem card,
disconnect the modem card from the telephone line while the cover (lid) of the DTE
(computer) is removed.
Installation of the modem card in a DTE (computer) which does not require a tool to
open the cover (lid) will render the permit void.
Disconnect the telephone line before opening the cover (lid) of the DTE (computer).
Do not connect the customer equipment to the telephone line while the cover (lid) of
the DTE (computer) is open.
Modems connected to the Australian telecommunications network must be marked in
accordance with the Labeling Notice. This modem has been specifically configured to
ensure compliance with the ACA Standards. Do not adjust your modem or software
outside the values indicated as below. To do so would result in your modem being
operated in a non-compliant manner.
WARNING
FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A
TELECOMMUNICATIOS COMPLIANCE LABEL. THIS INCLUDES
CUSTOMER EQUIPMENT PREVIOUSLY LABELLED
PERMITTED OR CERTIFIED.
WARNING
ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS
COMPLIANCE LABEL