SWITCH DESCRIPTION
2. SWITCH description
2.1. Introduction
Internal switch (expansion port SWITCH) is created as an addition of router desk. With
this device LAN ports (RJ-45 connectors for connecting ethernet devices) of the router act as if
this router was a typical switch device. Which means that the router with internal switch desk
reads ethernet frames (a data packets on an ethernet link) from any port and transmits them
on other ports. Each port on this device can transmit frames independently from every other
port.
A detailed description of all ports is available in the user's guide of the corresponding
router or in the specific port manual.
2.2. Compatibility with Conel routers
Internal switch desk can be used in routers, which fall into v2 range. It answers to these
devices:
ER75i v2,
UR5 v2,
UR5i v2,
XR5i v2,
LR77 v2,
CR10 v2.
However there must be met the condition, that the last number of the serial number of
the router desk must be five or higher.
To programm the device desk must be used firmware version 3.0.1. or later.
2.3. Power supply
The switch is powered internally from the device which is mounted in.
2.4. Standard accessories
Declaration of conformity
Complaints procedure
User's guide
5
12-05-17
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
w
w
w
.luco
m.d
e
inf
o@lucom
.de
